What's the PMMA?

PMMA, commonly sold as MDMA, see para-Methoxy-N-methylamphetamine. For other uses, see Acrylic (disambiguation).
Poly(methyl methacrylate) (PMMA), also known as acrylic or acrylic glass as well as by the trade names Crylux, Plexiglas, Acrylite, Lucite, and Perspex among several others (see below), is a transparent thermoplastic often used in sheet form as a lightweight or shatter-resistant alternative to glass. The same material can be used as a casting resin, in inks and coatings, and has many other uses.
Although not a type of familiar silica-based glass, the substance, like many thermoplastics, is often technically classified as a type of glass (in that it is a non-crystalline vitreous substance) hence its occasional historical designation as acrylic glass. Chemically, it is the synthetic polymer of methyl methacrylate. The material was developed in 1928 in several different laboratories by many chemists, such as William Chalmers, Otto Röhm, and Walter Bauer, and was first brought to market in 1933 by the Rohm and Haas Company under the trademark Plexiglas.
PMMA is an economical alternative to polycarbonate (PC) when tensile strength, flexural strength, transparency, polishability, and UV tolerance are more important than impact strength, chemical resistance and heat resistance.[5] Additionally, PMMA does not contain the potentially harmful bisphenol-A subunits found in polycarbonate. It is often preferred because of its moderate properties, easy handling and processing, and low cost. Non-modified PMMA behaves in a brittle manner when under load, especially under an impact force, and is more prone to scratching than conventional inorganic glass, but modified PMMA is sometimes able to achieve high scratch and impact resistance. 
Tips: JWT has over 7 years experience in silicone rubber product and plastic injection product manufacturing. More detail: www.jwtrubber.com

评论

发表评论

此博客中的热门博文

Natural rubber & Synthetic rubbers

图片
Natural rubber Natural Rubber - Solid state Natural rubber is made from a runny, milky white liquid called  latex  that oozes from certain plants when you cut into them. (Common dandelions, for example, produce latex; if you snap off their stems, you can see the latex dripping out from them. In theory, there's no reason why we couldn't make rubber by growing dandelions, though we'd need an awful lot of them. Although there are something like 200 plants in the world that produce latex, over 99 percent of the world's natural rubber is made from the latex that comes from a tree species called  Hevea brasiliensis , widely known as the rubber tree . This latex is about one third water and one third rubber particles held in a form known as a  colloidal  suspension. Natural rubber is a polymer of isoprene (also known as 2-methylbuta-1,3-diene) with the chemical formula (C 5 H 8 )n. To put it more simply, it's made of many thousands of basic C 5 H 8 units (the mon
阅读全文

Types of Liquid Silicone Rubber

图片
Silicone rubbers are man-made polymer materials that have a wide range of industrial and manufacturing applications. The various types of silicone rubbers include room temperature vulcanize, liquid silicone, fluorosilicone and high-consistency rubber. In this post, we’ll provide information about liquid silicone rubber, including what it is and the types that are available for manufacturing purposes. WHAT IS LIQUID SILICONE RUBBER? Liquid silicone rubber (LSR) is classified as an elastomer, which means it possesses exceptional elasticity (ability to resume its normal shape after stretching). Key LSR attributes include hardness, tensile strength (resistance to break under tension) and compression set. Other LSR characteristics include excellent bacteria resistance and hydrophobicity, meaning that it acts as a water repellent. The two liquid silicone rubber types include food grade and medical grade. WHAT IS FOOD GRADE LSR? Food grade liquid silicone rubber is well-suited for
阅读全文

An Introduction About Plastic And Marrin Litter

Plastic is present everywhere around us – its durability, low cost, light weight and easily modified shape and properties has led to almost exponential increase in production since its large-scale manufacturing started in 1950s. Nowadays the global annual production of plastics exceeds 311 million tons and it is expected to rise year after year. Plastic is a synthetic material consisting of polymers, which form the basic structure of plastic. This structure can be modified to fulfil different needs by using additives that for example improve the flexibility or strength of the material. The wide variety of different plastics have their unique properties which make them suitable for different applications, e.g. packaging or insulation. Marine litter includes all anthropogenic material that has been entered the marine environment by intentional or unintentional actions of human beings. The composition of marine litter varies between locations, but usually most of the litter consists of p
阅读全文