How loudspeakers turn electricity into sound

Animation: How a loudspeaker works. When a fluctuating electric current flows through the coil (orange), it becomes a temporary electromagnet, attracted and repelled by the permanent magnet (blue/red). As the coil moves, it moves the cone (gray) back and forth, pumping sound waves into the air (light blue).

When things shake about, or vibrate, they make the sounds we can hear in the world around us. Sound is invisible most of the time, but sometimes you can actually see it! If you thump a kettle-drum with a stick, you can see the tight drum skin moving up and down very quickly for some time afterward—pumping sound waves into the air. Loudspeakers work in a similar way.

At the front of a loudspeaker, there is a fabric, plastic, paper, or lightweight metal cone (sometimes called a diaphragm) not unlike a drum skin (colored gray in our picture). The outer part of the cone is fastened to the outer part of the loudspeaker's circular metal rim. The inner part is fixed to an iron coil (sometimes called the voice coil, colored orange in the diagram) that sits just in front of a permanent magnet (sometimes called the field magnet, and colored yellow). When you hook up the loudspeaker to a stereo, electrical signals feed through the speaker cables (red) into the coil. This turns the coil into a temporary magnet or electromagnet. As the electricity flows back and forth in the cables, the electromagnet either attracts or repels the permanent magnet. This moves the coil back and forward, pulling and pushing the loudspeaker cone. Like a drum skin vibrating back and forth, the moving cone pumps sounds out into the air.

JWT rubber plastic co.,ltd has a strong engineer team with over 10 years experience. Any questions will be responsed within 48 hours.